The cover is made of acrylic fabric that has similar UV-resistance to UV cloths, and the cushion is sewn with GORE-Tenara, which is an outdoor sewing thread. GORE-Tenara is super strong – the UV won't be able to burn it out! The inner foam material is quite hard compared to ordinary cushions. Even when the boat rocks hard or suffers external shock, you won’t have to worry about your back or butt getting hurt if you have this cushion! Also, the foam is perfectly covered with a watertight inner-cover. In case of emergency, you can use this cushion as a float in the water. The outer-cover is detachable so you can take it off, wash it anytime, and keep it clean and fresh. The back of the cushion has slip-resistant vinyl mesh, so you can use it in shaky steep places. You can also connect the cushion vertically, and form your own chair with a seat and backrest. Or, you can connect the cushion horizontally to form a wider seat. You can also connect them vertically and horizontally at the same time (The cushions can be “connected” but you cannot “fix” the angles firmly).
SIZE: 40cm x 40cm x 80cm (Note: Minor deviations between the stated dimensions and actual dimensions are possible due to the nature of the fabric used)
Connect them laterally: Comfortable wide bench seats
On each side of this cushion, we alternately placed coupling belts with a Velcro and a belt hole. By placing 2 cushions side by side, you can connect the belt on one cushion to the other by putting the belt through the belt hole on the other cushion. This makes the cushions look like they’re hugging each other, and the cushions will be connected side by side. You won’t have to place several different cushions on a long seating surface and worry about the cushions sliding off the bench or coming apart. Instead you just have to connect these cushions side by side!
Connect them vertically: Form your own backrest!
2 short belts for vertical connection are placed on the backside of the cushion, each through a belt hole. This belt has a male and female Velcro sewn on the back side. To connect the 2 cushions, 1. completely remove the belt attached to one of the cushions, 2. put the belt attached to the other cushion through the belt holes on both cushions, and 3. attach the belt you just removed by pasting the 2 together. Then, you can use the 2 cushions as a seat and backrest.
Non-slip mesh: lifesaver when you fall into the water
The backside of this cushion has a mesh panel with a gripping effect. The mesh is cut in a concave shape on both sides, allowing the user to put their hands between the mesh and the cushion. In addition to its normal function as a non-slip surface, the mesh is designed to make it easier for a person who has fallen into the water to put their hands in between the mesh and the cushion. When someone falls into the water by accident, throw the cushion into the water, and the cushion can be used as an emergency float. The inner cushion is completely waterproof, so it retains buoyancy for a long period of time and can be used for life-saving!
Washable outer cover with handles
The outer cover of this product is fully washable, with zippers on 3 sides that can be opened to remove the foam material inside. The acrylic fabric is resistant to mildew and stains, but it is recommended to rinse off salt after use and dry thoroughly before storing. This cover has a small slot in the front, which serves as a handle for carrying it by hand. Since this product is relatively hard as a cushion and cannot be folded small, being able to carry it hanging in your hand will come in handy! You can also use this loop to fix the cushion wherever you want to.