Sale Off
Halyard, Multi Race

SKU:MHRA11-MM-BL

$291.00
8mmx35m10mmx40m
Blue/Grey
8mmx35m10mmx40m
Blue/Grey
0
3

High strength & low stretch halyard:
Dyneema line with eye splice

Robline’s Globe 5000 double braid Dyneema line is used for the ropes. The tip cover is partially removed and the core is eye spliced. You can install your own shackles, without having to buy new ones, so it’s cost-efficient. No need to re-splice it when the shackle needs to be replaced. 

Lightweight, durable, and easy to maintain!

The end of the halyard is usually eye spliced to install the shackle. The spliced part of the rope will have twice as many fibers, making it thicker, stiffer, and heavier. This is an unavoidable fatal flaw with normal manufacturing methods. However, this product overcomes this problem by looping the tip of the Dyneema core, adding a lot of advantages. Weather-resistant, low stretch and high strength Dyneema is still durable even after being made thin. Dyneema is also 20% lighter than polyester. Because of this, the weight of the mast top is greatly reduced. 

Most shackles installable on the big loop on the tip 

The shackle can be quickly attached and detached by securing it with a cow hitch. The shackle can be easily cow-hitched by threading it through the loop. You won’t have to pass the entire length of the line through the loop. The loop at the end of this product is quite big, making it very easy to replace the shackle.

Lead loop on the cockpit side 

When replacing the halyard, you’ll be able to pass the new halyard into the mast by sewing a new halyard onto the old halyard and pulling the new halyard in with the old halyard. This product has a small loop at the end of the rope made of durable Dyneema thread. Tying this on the end of the old halyard allows you to replace halyards without any hassle.

Full length of main ropeDiameter of main ropeFull length of Dyneema tailLoop size
35m8mm8m70mm
40m10mm9m80mm

Recommended rope sizes

The following is an excerpt from Robline's catalog. Before reading it, please check the rope size that is compatible with your fittings. If the ropes are too thick for the rope clutches, blocks or masthead sheave box, it can cause problems such as the sail hoist becoming extremely heavy. By using the Dyneema line, you’ll be able to reduce the rope size by one rank. The friction with the rigging will be reduced, making operation easier. Please note that the following values fluctuate depending on weather conditions and other factors.

Boat size (m)Spinnaker halyardJib halyardMain halyardSpinnaker sheetJib sheetMain sheet
6~8m8mm8mm8mm10mm10mm10mm
9m8mm10mm10mm10mm12mm10mm
10m10mm10mm10mm10mm14mm12mm
11m10mm12mm10mm12mm14mm12mm
12m12mm12mm12mm12mm14mm12mm
14m12mm12mm12mm14mm14mm12mm
16m12mm14mm12mm14mm14mm14mm
18m14mm14mm14mm14mm14mm14mm
24m16mm16mm16mm16mm16mm16mm

Related products

$633.00
$685.65

BUY NOW

Sale Off
Halyard, Multi Race

SKU:MHRA11-MM-BL

$291.00
8mmx35m10mmx40m
Blue/Grey
8mmx35m10mmx40m
Blue/Grey